Electrical panels we manufacture

Main Distribution Panel (MDP)

The first panel after the transformer or utility meter.

Main Distribution Board (MDB)

A distribution board fed from the main panel that splits supply to sub-boards, large loads or building blocks, with protection on each outgoing way.

Sub Distribution Board (SDB)

A board placed close to the loads it serves, so long cable runs from the main panel are avoided and each area can be isolated on its own.

Power Distribution Board (PDB)

Distributes power to equipment loads such as machines, sockets and HVAC units, with outgoing protection sized to each circuit.

Also: Power Distribution Panel

Lighting Distribution Board (LDB)

Feeds and protects lighting circuits.

Final Distribution Board (FDB)

The last board before end-use circuits, with individual protection for each outgoing circuit.

Feeder Pillar Panel

An outdoor-rated distribution enclosure that feeds multiple outgoing cables from one supply point, built for exposed locations.

Busbar Panel

A panel built around a common busbar system that links an incomer to several outgoing feeders, sized to the current the project requires.

Bus Coupler Panel

Joins or separates two busbar sections, so one section can be maintained or fed from another source without a total shutdown.

Also: LT Bus Coupler Panel

Rising Main Panel

The tap-off and distribution panels used with a vertical rising main, giving each floor its own supply point.

Medium Voltage Panel (MV Panel)

Switching and protection panels for medium voltage distribution, built to the switchgear and protection scheme specified by the project.

Power Control Centre (PCC)

The main power hub of an industrial plant.

Also: Main Power Control Centre (PCC), LT PCC Panel, Main LT PCC

Motor Control Centre (MCC)

Groups the starters, protection and control for many motors in one assembly, so a plant section can be operated and serviced from one place.

Also: LT MCC Panel

Intelligent Motor Control Centre (IMCC)

An MCC with communicating motor protection relays and meters, so motor status, trips and energy data reach the plant control system.

PLC Control Panel

Houses the PLC, I/O, power supplies and field terminations for a machine or process, wired and labelled to the control drawings.

VFD Panel

Variable frequency drive panels for speed control of motors, with the drive, protection, cooling and control wiring in one enclosure.

Soft Starter Panel

Starts motors with a controlled ramp to reduce inrush current and mechanical stress, with bypass and protection as the application needs.

Star Delta Starter Panel

A starter that reduces starting current by running the motor in star before switching to delta.

DOL Starter Panel

Direct-on-line starting with overload protection for smaller motors where full starting current is acceptable.

Pump Control Panel

Controls one or more pumps with level, pressure or timer logic, including duty/standby and protection against dry running where required.

Compressor Control Panel

Starting, protection and pressure-based control for air or gas compressors.

Machine Control Panel

The control panel for a single machine — power, interlocks, operator controls and safety circuits built to the machine builder's drawings.

Crane Control Panel

Controls hoist, cross-travel and long-travel motions, with the braking, limit and interlock circuits a crane requires.

Furnace Control Panel

Power and temperature control for heating elements and furnace auxiliaries, with interlocks for safe operation.

Process Control Panel

Instrumentation and control panel that brings field signals, controllers and indication together for a process section.

Automation Control Panel

A combined power and automation panel — PLC, drives, HMI and networking — for a complete line or utility.

SCADA Control Panel

Panels for the communication and control hardware that connects field equipment to a SCADA system.

APFC Panel

Automatic Power Factor Correction panel.

Also: Automatic Power Factor Correction (APFC) Panel

Power Factor Correction (PFC) Panel

Fixed or manually switched capacitor panels for loads whose reactive power demand is steady.

Capacitor Bank Panel

Houses capacitor units with their switching and protection, arranged in steps according to the reactive power required.

Harmonic Filter Panel

Passive filter panels with detuned reactors and capacitors that reduce harmonic distortion from drives and rectifiers.

Active Harmonic Filter (AHF) Panel

Panels built around an active filter that measures harmonic current and injects compensating current in real time.

Static VAR Generator (SVG) Panel

Panels for static VAR generators that provide fast, stepless reactive power compensation.

Automatic Voltage Regulator (AVR) Panel

Houses voltage regulation equipment that holds the supply voltage steady for sensitive or critical loads.

Relay Protection Panel

Protection relays, CT/PT terminations and trip circuits arranged to the protection scheme of the network.

Also: HT Protection Panel

Metering Panel

Energy and power meters with CT/PT connections, for billing, sub-metering or monitoring.

Changeover Panel

Manual or automatic changeover between two supply sources, with interlocking so the sources are never paralleled by mistake.

Load Management Panel

Sheds and restores loads in priority order to stay within the available supply or contract demand.

Energy Monitoring Panel

Collects meter data across a site and makes it available to an energy management system.

Busbar Trunking Panel

Interface and tap-off panels that connect busbar trunking runs to switchboards and loads.

High Tension Panel (HT Panel)

Switchgear panels on the high-voltage side of a substation — incoming, metering, protection and outgoing to transformers — built around the specified breaker and relay scheme.

HT VCB Panel

High tension panel with a vacuum circuit breaker for switching and protecting HT feeders and transformers.

HT RMU Panel

Ring Main Unit panels that allow a ring distribution network to be sectioned and fed from either side.

HT Metering Panel

Houses HT CTs, PTs and metering at the utility interface as per the supply authority's requirements.

HT Feeder Panel

Outgoing HT panels that feed transformers or downstream substations, with protection for each feeder.

Low Tension Panel (LT Panel)

The main low-voltage switchboard after the transformer, with incomer, metering and outgoing feeders built to the project single-line diagram.

Also: Main LT Panel, Main Electrical Panel

LT Distribution Panel

Low tension panel distributing supply to multiple downstream boards and loads with protection on each feeder.

LT Feeder Panel

Panel dedicated to outgoing LT feeders, often added as an extension to an existing LT board.

LT Incomer Panel

The incoming section of an LT system — main breaker, metering and protection between the transformer and the busbar.

LT Outgoing Panel

Outgoing sections with breakers or switch-fuse units for each load or sub-board.

Floor Distribution Panel

Floor-level panel that receives supply from the rising main or main panel and distributes it within the floor.

Lighting Control Panel

Switches lighting groups by time, sensor or BMS command, with manual override.

Also: Common Area Lighting Panel, Parking Lighting Panel

HVAC Control Panel

Power and control for HVAC equipment — chillers, AHUs, pumps and cooling towers — usually with BMS interface.

Fire Pump Control Panel

Controls main, jockey and diesel fire pumps on pressure demand, with the monitoring and alarms fire systems need.

Lift Control Panel

Power distribution and control panels for lift machine rooms, built to the lift supplier's requirements.

Also: Elevator Control Panel

Escalator Control Panel

Power and control panels for escalators and travelators, with the interlocks the equipment requires.

Emergency Power Panel

Feeds loads that must stay on during a mains failure — emergency lighting, fire systems and critical services.

Also: Essential Power Panel

UPS Distribution Panel

Distributes UPS output to critical loads with individual protection and, where needed, bypass arrangements.

DG Synchronization Panel

Synchronises two or more DG sets — or DG sets with the grid — so they share load on a common bus.

Also: Synchronizing Panel

AMF Panel

Auto Mains Failure panel.

DG Control Panel

Control, protection and metering for a single DG set.

ATS Panel

Automatic Transfer Switch panel that transfers load between two sources without manual intervention.

Solar ACDB

AC distribution box between solar inverters and the LT panel, with protection and isolation for the inverter outputs.

Also: Solar Distribution Panel, Solar LT Panel

Solar DCDB

DC distribution box combining PV strings before the inverter, with DC protection and isolation.

Inverter Control Panel

Houses inverters with their protection, cooling and control wiring.

Battery Management Panel

Houses battery monitoring and management equipment, with protection for battery strings.

Battery Distribution Panel

DC distribution from battery banks to loads, with protection on each outgoing circuit.

Wind Turbine Control Panel

Power and control panels for wind turbine auxiliaries and interconnection, built to the turbine supplier's scheme.

Hybrid Power Control Panel

Coordinates grid, DG, solar and battery sources according to a defined priority logic.

Fire Alarm Control Panel (FACP)

Enclosure, power supply and interface panels for fire alarm control systems, built around the detection system selected for the project.

Fire Fighting Control Panel

Controls fire fighting pumps, valves and auxiliaries with status indication for the fire control room.

BMS Control Panel

Houses BMS controllers and I/O modules that monitor and control building services.

Water Treatment Plant Panel

Controls pumps, dosing, filters and backwash sequences for water treatment plants.

STP Control Panel

Control panel for sewage treatment plants — blowers, pumps and sequence control.

Also: Sewage Treatment Plant Panel

ETP Control Panel

Control panel for effluent treatment plants with pump, agitator, dosing and blower control.

RO Plant Control Panel

Controls high-pressure pumps, valves and protection for reverse osmosis plants.

Chiller Control Panel

Power and control panels for chillers and their pumps.

Cooling Tower Control Panel

Controls cooling tower fans and pumps, with temperature-based staging where required.

AHU Control Panel

Starters, drives and controls for air handling units.

Conveyor Control Panel

Sequence control and interlocking for conveyor lines, with emergency stops and pull-cord circuits.

Irrigation Control Panel

Pump and valve control for irrigation systems, by timer, level or remote command.